Annual fall maintenance is
more than convenience; it's also a smart investment strategy. According to Nick Gromicko, founder of National Association of Certified Home Inspectors (NACHI), many homeowners are getting their homes professionally inspected in the fall and keeping a running
record. "Everyone needs a history of their home," says Gromicko, "and when you go to sell, having one could
make or break the deal. It helps prospective buyers see evidence of the repairs you've made over the years." Every
time you make repairs or renovations, it's a good idea to take a video or photo of the results and save the details in
your computer. NACHI provides an online database where customers can store the results of yearly inspections.
Although
you should call a specialist for certain jobs (Swift recommends getting heating systems checked annually by an expert), here
are jobs you can do yourself.
Clean gutters and drainage spouts. Protect
yourself first by always wearing gloves—animals or insects can hide in gutters. A gutter scoop is a convenient tool
for removing leaves and other debris. Then place the garden hose in the downspout to flush it out.
Inspect your roof. Look for signs of deterioration (loose shingles, rotting wood, cracks, etc.).
Carefully trim heavy branches that are hanging over your roof. (A falling branch could hurt someone, cause a blackout or damage
your roof. If you're using your chimney, flying sparks could possibly ignite overhanging branches.) If the branches are
near power lines, call a professional tree-trimming company to do the trimming; they may need to ask your power company to
temporarily disconnect your power before they start working.
Check all windows
and doors. Remove summer screens and install storm windows and doors. Inspect and repair any loose or damaged windows
or door frames. Install weather stripping or caulking around windows and doors to reduce drafts too. If you discover signs
of deterioration such as moisture on surrounding walls or dry-rot damage, call a certified home inspector or restoration specialist
immediately.
Clean your heating system. Replace the filters in your
furnace. (Swift recommends doing it monthly if you have allergies.) Check for air leakage around the joints. And consider
having an air-conditioning and heating specialist check your entire system before winter sets in. If you don't already
have one, install a carbon-monoxide detector near all appliances that burn fossil fuel, but be sure you install it in an area
where you'll hear the alarm if it's triggered.*
Check the smoke detector.
Some people wait until they reset their clocks during Daylight Savings Time to inspect their smoke detectors, but if you missed
it in the spring, don't wait another month—check them now. Press the button to make sure it beeps and replace batteries
if necessary. Most smoke detectors signal with an automatic beep when the battery gets low, but it's always good to check
on an annual basis. Smoke detectors should be replaced every 10 years; batteries should be replaced every six months.
Secure the cracks. From skunks to insects to other critters, your home can fall prey
to unwanted invaders. Before they start seeking shelter from the cold, inspect the perimeter of your house for cracks or holes
where they could enter and then seal well. Clean and lubricate the garage-door hinges, rollers and tracks to make sure the
door closes securely. If you detect evidence of animal activity, such as urine odors, unexplained gnaw marks, feces or footprints,
consult an exterminator.
*Safety Tip: Experts—from fire chiefs
to home inspectors—advise investing in stand-alone smoke and carbon-monoxide detectors. (That is, avoid buying them
as a combo unit.) The reason? Both smoke and carbon-monoxide detectors, especially the more sensitive units, could go off
falsely and unfortunately, annoyed homeowners may disable them. In the case of combo units, disabling one detector also disables
the other, thereby eliminating protection against both fires and carbon monoxide. Always investigate an alarm even if it seems
false; the detector may be picking up on threats which may not be easily visible to you. On the other hand, too many false
alarms from a unit may indicate a need to replace it.